Skip to main content

Thistle Roller Co.

Soccer

Soccer Ball Machine Wheel Recovering

Shooting, passing and goalkeeper training machines launch thousands of balls a session, often outdoors. We recover their wheels with new polyurethane in volume, for machine manufacturers, dealers and service shops, and for clubs and academies running multiple machines.

Every rep depends on the wheels

A soccer machine fires the ball between spinning wheels, and their grip sets the pace, the height and the curve. Grass, grit and moisture on the balls wear the tread faster than indoor use, and a worn tread can't put the same spin on the ball twice.

Thistle Roller already recovers soccer launcher wheels. If the hub is sound, we strip the old tread, cast new polyurethane onto it, then grind the profile and balance every wheel in our own shop.

Large ball-launching wheels with contoured polyurethane treads ground to profile

Signs your soccer machine wheels need recovering

Balls lose pace

Shots and crosses come out slower at the same setting. A worn tread grips the ball with less force.

Inconsistent curve and height

The same drill sends balls to different spots. Uneven treads put uneven spin on the ball.

Scored or rough tread

Grit from the field scores and roughens the surface, especially on machines used outdoors every day.

Hard or cracked tread

Sun, heat and weather harden the tread on machines stored or used outside, until it cracks or slips.

Ball machine wheel with new polyurethane tread being finished on a lathe at Thistle Roller

Built for big balls and outdoor use

Soccer machine wheels are large and often contoured to keep the ball centered. We grind the new polyurethane back to that profile or to the spec you send us, with the finish you need.

Polyurethane holds up to abrasion far better than rubber, which matters when every ball has been on the grass. And it's the same work we do for industry: custom rollers built to spec for material, finish, grooving and contour, held to tolerances tight enough for aerospace.

How it works

01

Send a photo

Email or upload a photo of the wheels, the machine type and the quantity.

02

Ship your wheels

Pull the wheels and send them in. We work from your existing hubs.

03

We recover them

Old tread off, new polyurethane on, then ground to profile and balanced in our shop.

04

Back on the pitch

Your wheels ship back ready to mount, with our 1-year warranty.

Soccer machine wheel questions

Can you match the profile on our wheels?

Yes. Send a wheel, a drawing or the specs and we'll grind the new tread to match.

Should we recover every wheel on a machine?

We recommend it. Matching treads put the same spin on every ball, so the wheels should be recovered together.

When should we send wheels in?

Between seasons. Sending a full set during the break keeps your machines ready for preseason training.

Do you repair soccer machines?

No. We recover the wheels only. Motors, controls and frames stay with your machine's service provider.

See all sports and recreation wheels we recover

Polyurethane wheel recovering by the batch

Building machines, servicing them or running a club with multiple machines? Send us a photo of the wheels and your quantities, and we'll quote the run.

Request a Quote