Skip to main content

Thistle Roller Co.

Football

Football Passing Machine Wheel Recovering

Passing and receiving machines rely on their wheels to throw a tight spiral at the same speed every rep. We recover those wheels with new polyurethane in volume, for machine manufacturers, dealers and service shops, and for programs running multiple machines.

A clean spiral starts at the wheel

A football machine grips the ball between its wheels and spins it as it leaves. The tread's grip and profile decide the speed, the spiral and where the ball lands. Many football wheels are contoured to fit the shape of the ball, so the profile matters as much as the material.

Thistle Roller already recovers football launcher wheels. If the hub is sound, we strip the old tread, cast new polyurethane onto it, then grind the profile and balance every wheel in our own shop.

Ball machine wheels with flat and contoured polyurethane treads in the Thistle Roller shop

Signs your football machine wheels need recovering

Wobbly throws

The ball comes out wobbling instead of spiraling at a setting that used to throw it clean.

Short or slow passes

Throws fall short or the machine can't reach its old speed. A worn tread can't grip the ball as hard.

Cuts and chunks

Cuts, tears or missing pieces in the tread. At launch speed, small damage spreads fast.

A slick, hard tread

Treads harden and glaze over time. A slick tread slips on the ball instead of spinning it.

Large ball-launching wheels with contoured polyurethane treads ground to profile

Contoured to fit the ball

Most football machine wheels have a contoured tread that cradles the ball and keeps it centered. We grind the new polyurethane back to that profile, or to the spec you send us, with the finish you need.

It's the same work we do every day for industry: custom rollers built to the customer's specs for material, finish, grooving and contour, held to tolerances tight enough for aerospace.

How it works

01

Send a photo

Email or upload a photo of the wheels, the machine type and the quantity.

02

Ship your wheels

Pull the wheels and send them in. We work from your existing hubs.

03

We recover them

Old tread off, new polyurethane on, then ground to profile and balanced in our shop.

04

Back on the field

Your wheels ship back ready to mount, with our 1-year warranty.

Football machine wheel questions

Can you match the contour on our wheels?

Yes. Send a wheel, a drawing or the specs and we'll grind the new tread to match.

Should we recover every wheel on a machine?

We recommend it. The wheels need to grip the ball the same way for a consistent spiral, so they should be recovered together.

When should we send wheels in?

After the season and before summer camps. Sending a full set in the off-season keeps your machines ready when practice starts.

Do you repair football machines?

No. We recover the wheels only. Motors, controls and frames stay with your machine's service provider.

See all sports and recreation wheels we recover

Polyurethane wheel recovering by the batch

Building machines, servicing them or running a program with multiple machines? Send us a photo of the wheels and your quantities, and we'll quote the run.

Request a Quote